How to Fix Laptop Keyboard Water Damage – Ultimate Guide 2022

Laptop users, do you find yourself inundated with water damage symptoms? You might be asking yourself “how can I fix laptop keyboard water damage?” Well, look no further than this guide! With the right knowledge and tools you will know exactly how to fix your laptop keyboard. Let’s get started!

How to fix laptop keyboard water damage – Ultimate Guide Step By Step

Fixing any laptop that has been exposed to water is a process. Each of the following steps must be followed in order for you to get your laptop back up and running again. If you skip a step or miss a crucial detail, the chances of your computer being irreparably damaged will increase exponentially. Be sure to follow each step carefully!

Step 1: Immediately turn off your wet laptop – As soon as you realize that your laptop has been exposed to water, do not hesitate! Turn it off immediately. Don’t wait until it dries on its own or reaches some sort of equilibrium with the environment because this could lead to short circuits, corrosion, and broken components. Here’s how to turn it off depending on whether or not you have a laptop with an external power button.

Step 1a: External Power Button – If you have a laptop with an external power button, press it immediately after realizing your computer is wet. This should turn the device off without fail. If your laptop turns on again, the water damage could be worse than if you simply let it dry naturally.

Step 1b: No External Power Button – If your laptop lacks any sort of external power button, then locate the battery and remove it . Take care to ensure that no metal parts are touching or connected to each other because this could induce a current between them! After removing the battery, put the machine in a safe place where it won’t come into contact with anything else until further instructions are given.

Step 2: Remove the water from the laptop, keyboard, etc – Remember how we talked about trying to preserve your computer by not exposing it to the surrounding environment? Well, now is when you want to try and do that. Carefully open up all of your devices and remove any excess water using a lint-free cloth or towel . You may need a toothbrush for hard-to-reach areas such as under keys on your keyboard. After this initial cleanup, you can decide whether or not you want to turn it back on again (we suggest against it). If you’re ready for more cleaning (and potentially endangering) then read on!

Step 3: Use air compressors and blowers with care – Be careful with this step, because it’s very easy to damage your computer if you act recklessly. The goal of this step is to dry out your laptop as thoroughly as possible before the clock strikes midnight (or some other arbitrary deadline). Use an air compressor or blower at low pressure on all wet areas. If you only have a vacuum cleaner available, make sure that it does not directly touch any parts inside of the device; always make sure there is ample space between them! You can try using compressed air but be extremely cautious. It is possible for compressed air cans to shoot liquid into the machine which would then lead to electrical problems later on.

Step 4: Disassemble and clean more thoroughly – that basic cleaning has taken place, the next step is to gently remove dirt, lint, and debris from inside your device. This will get all of the water out of crevices that are hard to reach with compressed air. You can use a vacuum cleaner at this stage or simply blow on it using compressed air again if you would like. Be careful not to poke around inside too aggressively because there are some very sensitive devices near the motherboard that may be damaged by more vigorous cleaning.

Step 5: Work on drying out your electronics – Now that you’ve done everything you think is necessary for repairing your laptop , it’s time to start working toward some sort of equilibrium between wet and dry components in your hardware. Ideally, they both want to be more on the dry side but there’s a delicate balance that must be maintained. If there is still moisture inside your device, it could lead to corrosion or serious damage down the line, so you need to work on drying out anything wet immediately!

Step 6: Remove batteries – This isn’t always necessary but we strongly recommend doing this if possible. The last thing you want is a battery going bad because of water damage and leaking corrosive chemicals in your machine . Use soft cloths or air blowers to dry out the compartments where the battery was placed. It may even help to use a vacuum cleaner with no attachment in order to get under keys for better cleaning.

Step 7: Dry thoroughly – You can use rice or silica packets from an electronics store for this step. Either one works fine on its own, but using both together is usually a winning combination. Put some rice or silica packets inside of a container and place your hardware inside for a night or two. You should notice that the components have dried even further after this method has been applied!

Step 8: Assemble everything back together – Take special care with this step, because there’s no going back once you’ve closed up your device. Make sure that there are no foreign particles on the outside of your laptop (such as dust) when assembling it back together. Tighten screws to reasonable specifications (don’t go overboard here!) and make sure you’re putting the devices in their proper positions before snapping them into place. Watch out; snapping plastic together can hurt if it’s done incorrectly, so be sure to keep your hands clear of the pieces!

Step 9: Test your laptop – This isn’t a necessary step but most people would like to know that their device is functioning properly. If you feel that there may still be water damage after following this guide then do not turn on or charge your laptop until you have reached out to a professional for advice and guidance . There are many devices which will appear functional but actually aren’t.

Step 10: Clean up any messes – Once all of the work is complete, make sure there aren’t any leftover rice or silica packets laying around. You wouldn’t want a curious pet or a small child getting into those! Step 11: Troubleshoot – The first few days may be a little shaky but after that, if everything works as it should, you can rest easy!

If your device still isn’t working properly or comes back with the same issues after following this guide then we recommend that you contact an electronics repair shop . They will be able to diagnose and solve any problems which you might have.

Categories How